Menu
1300 227 354
Confined SpaceWorking at HeightsInductionsEmergency ResponseFirst AidQualificationsE-learningNon-AccreditedSafety, Risk & Compliance

Confined Space Rescue | Fire specific

Confined space rescue involves completing the rescue of entrapped or injured personnel often within very small and narrow spaces that may expose crews to a variety of hazards.
 
It is one of the most dangerous forms of technical rescue, as it combines a hazardous atmosphere with other less encountered hazards such as engulfment and entanglement.
 
For fire crews to complete safe rescues of personnel within confined spaces they must understand the hazards that may be found within confined spaces, understand what skills and knowledge local workers may provide, and complete specific confined space rescue training across a variety of typical scenarios that are common within their response area.
 
To reduce the likelihood of fatalities and injuries to firefighters, they must be equipped with an understanding of their local ‘typical’ confined spaces, a thorough understanding of confined space hazards and an understanding of the typical control measures that may be used to make the rescue safer.

Gas test atmospheres [Short Course]

Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to safely use and operate single or multi-gas detection instruments. This training is suitable for any personnel required to enter areas where there is a risk of atmospheric hazards.

 

Operate Breathing Apparatus [Short Course]

Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to safely use and operate respiratory protective equipment.

This training is suited to all personnel required to wear respiratory protective equipment to work in a confined space or an irrespirable atmosphere.

 

Safe Working in a Confined Space

Confined Space Training allows workers to perform basic risk assessments and enter a confined space to conduct work under an issued permit. 
 
Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in confined spaces as per AS/NZS 2865:2009 (Confined Spaces).

This training is suitable for employees who are required enter confined spaces for maintenance, servicing or vessels.


 

Safe Working in a Confined Space with Breathing Apparatus

Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in confined spaces and operate respiratory protective equipment as per AS/NZS 2865:2009 (Confined Spaces).

This training is suitable for employees who are required to enter confined spaces for maintenance, servicing or vessels etc with an irrespirable atmosphere.

 

Safe Working in a Confined Space with Breathing Apparatus [Refresher Course]

Refresher Course:
Our refresher course are short duration training courses designed for workers/candidates who hold existing accredited competencies delivered by our full courses.
 
Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in confined spaces and operate respiratory protective equipment as per AS/NZS 2865:2009 (Confined Spaces). This training is suitable for employees who are required to enter confined spaces for maintenance, servicing or vessels etc with an irrespirable atmosphere.

Entry Requirements:
The candidate must have completed confined space with breathing apparatus initial course within last 2 years and present proof of attainment upon enrolment.

HEIGHTS | Tower Rescue

This training course is designed to develop the required knowledge and skills of personnel and assist them to participate in a rescue operation as a member of a rescue team and support specialist rescue operations.  Rescue operations will be explored in conjunction with providing emergency care pending the arrival of appropriately qualified personnel.

Please note: This course is Non-Fire Specific, should you require a Fire Specific delivery for individuals working within the Fire Sector the pre-requisite unit of HLTAID003 Provide First Aid is required.  Speak to a member of our training team to discuss your individual requirements further. 

Work Safely at Heights

Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to safely work at height or depth utilising various forms of fall protection.

This training is suitable for any personnel required to perform tasks from heights or depths and is compliant to AS/NZS1891 Industrial fall-arrest systems and devices.

This course complies with the core training & assessment elements for a height safety operator.   

Standard 11 | Generic Induction Coal Surface

The Standard 11 course provides training and assessment for the Resources and Infrastructure Industry (RII) Units of Competency which are specified in Recognised Standard 11, Training in Coal Mines QLD Coal Mining Safety and Health Act 1999.

The course provides entry level and experienced workers with a pathway to enter into the Mining Industry.
 

CONFINE SMALL WORKPLACE EMERGENCIES IN A FACILITY [FIRE AND WORKPLACE EMERGENCIES]

This program has been developed for personnel who may be required to undertake first response to small workplace emergencies.

The unit of competency is not industry specific and can be adapted to suit specific workplace requirements. This program covers a range of emergencies that could be expected in the workplace using initial response equipment, including small fire, chemical and liquid spills.

Lead an emergency control organisation [Chief Warden]

The Lead an Emergency Control Organisation course covers the skills and knowledge required to make decisions about the safety of occupants during a facility emergency and to give instructions on the priority order for responding to an emergency incident.
 
It includes leading the preparation of facility emergency response procedures; commanding, controlling and coordinating facility emergency response procedures and responses and concluding the facility emergency incident. Individuals who undertake this work may also act as the primary liaison with emergency services after their arrival.



 

Operate as part of an emergency control organisation [Emergency Warden]

This accredited Fire Warden Training course is specifically designed to develop and maintain key skills for your fire wardens who will be required to safely evacuate people in your workplace.
 
Our qualified industry trainers assess your existing evacuation plan and system prior to training to ensure the delivery is customised to meet your organisations requirements.
 
This programme has been developed for personnel required to respond to an emergency situation and act as a member of a workplace emergency control organisation.
 
This unit of competency is not industry specific and can be adapted to suit all workplaces.

 

Perform rescue from a Live LV Panel including Cardiopulmonary Resuscitation [LVR Incl. CPR]

Our nationally accredited Perform rescue from a Live LV Panel course will provide participants with the skills and knowledge to effectively respond to an electrical emergency using a low voltage rescue kit and perform Cardiopulmonary Resuscitation (CPR) on a casualty who has stopped breathing.
 
This course is suitable for participants who come into contact with electricity during their day-to-day work including Commercial Infrastructure, Electrical Safety, Electricians, Telco’s and NBN, telecommunications, those who work on High Rise Buildings, TV Antenna installers, Shop fitters, Professional Industries involving Construction and or electrical installation, those who work with Gas and/or refrigeration.

Provide Advanced First Aid

The Provide Advanced First Aid course provides the necessary skills and knowledge required to provide an advanced first aid response, including management of the incident and other first aiders, until the arrival of medical or other assistance.
 
This accredited course applies to workers who may be required to provide, coordinate and manage a first aid response across a range of complex situations, including community and workplace settings.


 

Provide advanced resuscitation

The Provide Advanced Resuscitation course provides the necessary skills and knowledge required to use specialised equipment in the provision of resuscitation in line with the Australian Resuscitation Council (ARC) guidelines.
 
This accredited unit applies to workers who may be required to use specialised equipment to provide resuscitation in a range of complex situations, diving, including community and workplace settings.

Provide Cardiopulmonary Resuscitation [CPR]

Cardiopulmonary Resuscitation (CPR) is a critical first aid skill that can save lives and dramatically affect a person’s chance of surviving a medical emergency. Provide Cardiopulmonary resuscitation (CPR) covering AED is offered both individually and as part of our HLTAID003 Provide first aid course.
 
Provide Cardiopulmonary resuscitation (CPR) covering AED teaches participants all the skills and knowledge needed to administer CPR on adults, children, and infants and how and when to use a defibrillation machine if required.
 

Provide First Aid

This course provides the skills and knowledge required to provide a first aid response to a casualty and describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.
 

Manage first aid services and resources

The Manage first aid services and resources course provides the skills and knowledge required to establish, maintain and facilitate the provision of appropriate first aid in the workplace.

Specific licensing requirements relating to this competency, including requirements for refresher training, should be obtained from the relevant state/territory Work Health and Safety Regulatory Authority.

Occupational First Aid Skill Set

The Occupational first Aid course is a nationally recognised skill set [HLTSS00027 - Occupational first aid skill set] which provides training on the skills and knowledge required to establish, maintain and facilitate the provision of appropriate first aid in a workplace environment, including the skills to provide an emergency first aid response in the event of an emergency.
 

Perform rescue from a Live LV Panel including Cardiopulmonary Resuscitation [LVR Incl. CPR]

Our nationally accredited Perform rescue from a Live LV Panel course will provide participants with the skills and knowledge to effectively respond to an electrical emergency using a low voltage rescue kit and perform Cardiopulmonary Resuscitation (CPR) on a casualty who has stopped breathing.
 
This course is suitable for participants who come into contact with electricity during their day-to-day work including Commercial Infrastructure, Electrical Safety, Electricians, Telco’s and NBN, telecommunications, those who work on High Rise Buildings, TV Antenna installers, Shop fitters, Professional Industries involving Construction and or electrical installation, those who work with Gas and/or refrigeration.

Provide Advanced First Aid

The Provide Advanced First Aid course provides the necessary skills and knowledge required to provide an advanced first aid response, including management of the incident and other first aiders, until the arrival of medical or other assistance.
 
This accredited course applies to workers who may be required to provide, coordinate and manage a first aid response across a range of complex situations, including community and workplace settings.


 

Provide advanced resuscitation

The Provide Advanced Resuscitation course provides the necessary skills and knowledge required to use specialised equipment in the provision of resuscitation in line with the Australian Resuscitation Council (ARC) guidelines.
 
This accredited unit applies to workers who may be required to use specialised equipment to provide resuscitation in a range of complex situations, diving, including community and workplace settings.

Provide Cardiopulmonary Resuscitation [CPR]

Cardiopulmonary Resuscitation (CPR) is a critical first aid skill that can save lives and dramatically affect a person’s chance of surviving a medical emergency. Provide Cardiopulmonary resuscitation (CPR) covering AED is offered both individually and as part of our HLTAID003 Provide first aid course.
 
Provide Cardiopulmonary resuscitation (CPR) covering AED teaches participants all the skills and knowledge needed to administer CPR on adults, children, and infants and how and when to use a defibrillation machine if required.
 

Provide First Aid

This course provides the skills and knowledge required to provide a first aid response to a casualty and describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.
 

Provide first aid in remote situations

 
This course delivers the skills and knowledge required to provide first aid response and emergency life support to a casualty in a remote and/or isolated situation, and applies to workers who may be required to prepare for and provide a first aid response in locations beyond the reach of timely medical assistance.

Certificate III in Emergency Response and Rescue

This qualification reflects the role of emergency response and rescue team members working in the resources and infrastructure industries.
 
The course has theoretical and practical components and delivered by our Industry experts  who have current real-world experience in fire and emergency response.
 

DRUG TESTING | Collect specimens for drugs of abuse testing

The Collect Specimens for Drug of Abuse Testing is a comprehensive pathology based training course designed to ensure the correct procedures are followed when performing onsite drug testing, alcohol breath tests, preparing and packaging a drug or alcohol test specimen for laboratory testing. 



 

HSR - Health & Safety Representative

The course is intended to assist HSRs understand their roles and functions as to how the WHS legislation will influence health and safety outcomes in their workplace. The course aims to provide participants with the knowledge and skills necessary to fulfil their role as HSRs. From the 1st of July, 2018, all elected HSRs are required under the WHS Act to attend this training.

Baseline Training is approved by Workplace Health and Safety Queensland to deliver this Health and Safety Representative Course in Queensland.

HSR - Health & Safety Representative (Refresher)

Welcome as a participant in the one day Refresher Training course for Health and Safety Representatives (HSRs) under the QLD Work Health and Safety (WHS) legislation. The course meets the requirements of the WHS Regulations for HSRs elected under the WHS Act. The WHS Act commenced on 1 January 2012. The WHS Act and WHS Regulation provide a national WHS legal framework from which the states, territories and the Commonwealth are required to implement their own WHS legislation.

Baseline Training is approved by Workplace Health and Safety Queensland to deliver this Health and Safety Representative Course in Queensland.

Licence to transport dangerous goods by road

Our Dangerous Goods (TLILIC0001 - Licence to transport dangerous goods by road)  course covers all aspects of the ADG Code together with relevant legislation, including Dangerous Goods classifications, placarding, stowage/load restraint, segregation and compatibility, emergency procedures and licencing requirements. In addition, it covers the responsibilities of drivers, consignors, owners and other personnel involved in the transport of dangerous goods

PMASUP236 - Operate Vehicles In the Field


Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to safely operate vehicles in the field including remote locations under a range of conditions. This unit is suitable for personnel who may be required to patrol areas across a variety of terrains looking for problems which require maintenance or reporting.

Pre-requisites
Nil

Port Facility Security Officer (PFSO)

Baseline Training offers a practical 2-day specialised Port Facility Security Officer (PFSO) Training Program tailored to Australian Legislation and the specific needs of staff working in Australian Ports and Port Facilities. Baseline also offers a half-day refresher course designed to get PFSO delegates up to speed with your knowledge and any changes to the legislation since initial training.

All personnel involved in maritime and port security activities are required by law to undertake training to comply with the Maritime Transport and Offshore Facilities Security Regulations 2003. ( Regulation 1.25(4)(b) and Regulation 3.115)

WHITE CARD - CPCCWHS1001 Prepare to work safely in the construction industry


CPCCWHS1001 - Prepare to work safely in the construction industry course contains the unit of competency specifies the mandatory work health and safety training required prior to undertaking construction work. The unit requires the person to demonstrate personal awareness and knowledge of health and safety legislative requirements in order to work safely and prevent injury or harm to self and others. It covers identifying and orally reporting common construction hazards, understanding basic risk control measures, and identifying procedures for responding to potential incidents and emergencies. It also covers correctly selecting and fitting common personal protective equipment (PPE) used for construction work.

Operate and maintain a four wheel drive vehicle